ISO 9001:2015 CERTIFIED CGWA & CPCB COMPLIANT | +91 9888169519
info@kbnengineers.in | Jalandhar, Punjab, India
KBN Engineers Logo
Home About Us All Products
PRODUCTS RANGE
PDF CATALOGS
Gallery Contact Us

Multi-Jet Domestic & Commercial Water Meter

Dry-dial magnetic transmission water meter with anti-tamper magnetic shield, screwed BSP ends, and selected high-grade brass/bronze body casting for municipal and residential metering.

ISO 4064 CLASS B/C ANTI-MAGNETIC SHIELD TEST PRESSURE: 2.0 MPA

Multi-Jet Dry-Dial Water Meter

The KBN Multi-Jet Water Meter operates on the velocity principle where water enters the measuring chamber through multiple tangential ports. This distributes hydraulic pressure equally across all impeller vanes, dramatically reducing bearing wear and ensuring exceptional low-flow sensitivity and measurement stability over years of continuous service.

The dry dial register is completely isolated from water contact by an O-ring sealed brass gland and driven magnetically. Selected high-density virgin materials resist scaling, algae adhesion, and exterior magnetic tampering.

Nominal Sizes Available DN15 to DN50 (1/2" to 2")
End Connections Screwed BSP / NPT with Unions
Body Casting Forged Brass / Bronze / Cast Iron
Operating Pressure 1.6 MPa (2.0 MPa Test Pressure)

Technical Specifications & Parameters

ISO 4064 Standard Verified
Parameter Technical Specification Value
Operating Principle Multi-Jet Tangential Velocity Impeller with Dry-Dial Magnetic Transmission
Available Nominal Sizes DN15 (1/2"), DN20 (3/4"), DN25 (1"), DN32 (1-1/4"), DN40 (1-1/2"), DN50 (2")
Accuracy Classification ISO 4064 Class B (Optional Class C high sensitivity)
Body Construction Heavy duty Forged Brass / Corrosion-Resistant Bronze (Optional Epoxy Cast Iron)
Connecting Threads Male gas thread with supplied brass union nuts, tailpieces, and sealing gaskets
Nominal Flow Rate (Qn) DN15: 1.5 m³/h | DN20: 2.5 m³/h | DN25: 3.5 m³/h | DN40: 10 m³/h | DN50: 15 m³/h
Working Pressure 1.6 MPa (16 Bar) continuous line rating
Maximum Hydrostatic Test Pressure 2.0 MPa (20 Bar) shell integrity test
Maximum Water Temperature Cold Water: ≤ 45°C (Optional hot water model up to 90°C)
Internal Strainer Integral cylindrical inlet filter screen prevents pipe scale from jamming impeller
Pulse Output Ready Optional magnetic reed switch pulse transmitter (1 pulse per 1L or 10L) for automated billing
Multi-Jet Hydraulic Balance

Equalized flow entry around the circumference minimizes radial thrust on the jewel pivot bearing for unmatched longevity.

Fog-Free Hermetic Register

The register operates in air and is completely separated from water to guarantee crystalline readability throughout life.

Anti-Tamper Shielding

Magnetic shield casing neutralizes outside magnet attempts to slow or freeze register counters.

Request Multi-Jet Meter Quantity Pricing

We supply certified residential and commercial water meters in lots of 50 to 5,000+ units with calibration certificates.